Umshini Wokugaya Umbhede X715
Umshini Wokugaya Ovundlile Wohlobo Lombhede X715:
1. Umshini unekhanda elijikelezayo elijwayelekile, ungenza kokubili ukugaya okuqondile nokuvundlile
2. Umshini unenjini ye-servo, kanti ama-axes amathathu asebenza ngokuzenzakalelayo. Unezindlela zokuqondisa eziyisikwele ezinokuqina okuphezulu.
3. Umshini ufakwe uhlelo lokuthambisa oluzenzakalelayo.
4. Umshini uwumshini wokugaya ofana nombhede onemithwalo emikhulu futhi ufanelekela ukugaya izinto zokusebenza ezinkulu
IZINHLOKO:
| IMODELI | IYUNITHI | X715 |
| ITHEBULA: |
|
|
| Usayizi wethebula | mm | 2100x500 |
| Isikhala se-T | no | 4 |
| Usayizi (Ububanzi) | mm | 20 |
| Ibanga eliphakathi nendawo | mm | 100 |
| Umthwalo omkhulu weThebula | kg | 2000 |
| ububanzi bokusebenza kwemishini: |
|
|
| Ukuhamba kwesikhathi eside | mm | 1500 |
| Ukuhamba okuhambayo | mm | 670 |
| Ukuhamba okuqondile | mm | 670 |
| ISIPHINDO ESIYINHLOKO: |
|
|
| I-spindle taper |
| I-ISO50 7: 24 |
| uhambo lwe-quill | mm |
|
| isivinini se-spindle/isinyathelo | i-rpm | 40-1600/12 |
| i-axis ye-spindle ebusweni bekholomu | mm | 610 |
| impumulo ye-spindle ebusweni betafula | mm | 0-670 |
| UKUDLA: |
|
|
| I-longitudinal/cross feed | mm/min | 20-1800/okungenazinyathelo |
| Okuqondile | mm/min | 10-900/ayinazinyathelo |
| Isivinini esisheshayo se-longitudinal | mm/min | 3500 |
| I-Rapid Traverse eqondile | mm/min | 1750 |
| AMANDLA: |
|
|
| injini eyinhloko | kW | 7.5 |
| injini yokondla | kW | 2 |
| ukuphakamisa imoto yekhanda | kW | 2 |
| injini yokupholisa | kW | 0.55 |
| abanye |
|
|
| ubukhulu bephakheji | cm | 228x228x283 |
| ubukhulu obuphelele | cm | 330x238x275 |
| N/W | kg | 7300/8000 |
