Umshini Wokubhoboza Wokugaya Ojikelele i-ZX6350A
IZICI ZOMSHINI WOKUGULA WOKUBHOBHA:
Umshini Wokubhoboza Nokugaya Ovundlile Noqondile X, Y-axis ngokuzenzakalela,
Injini yokuphakamisa i-axis engu-Z.
ukondla ngokuzenzakalelayo kwe-spindle.
IZINHLOKO:
| IMODELI | ZX6350A | ZX6350ZA |
| Usayizi wethebula (mm) | 1250x320 | 1250x320 |
| Ukuhamba kwetafula (mm) | 600×270 | 600×300 |
| Ithebula lokuphakelwa ububanzi (x/y) (mm/min) | 22-555(izinyathelo ezingu-8)(ubuningi.810) | 22-555(izinyathelo ezingu-8)(ubuningi.810) |
| Ububanzi obukhulu bokubhoboza (mm) | 50 | 50 |
| Ububanzi bokugaya obuphezulu (mm) | 100 | 100 |
| Ububanzi obukhulu bokugaya obuqondile (mm) | 25 | 25 |
| Ububanzi bokuthepha obukhulu (mm) | M16 | M16 |
| Ibanga ukusuka ku-spindle ovundlile kuya etafuleni (mm) | 0-300 | 0~300 |
| Ibanga ukusuka ku-spindle eqondile kuya kukholomu (mm) | 200-550 | 200~500 |
| Ibanga ukusuka ku-spindle eqondile kuya etafuleni (mm) | 100-400 | 100-400 |
| Ibanga ukusuka ku-spindle ovundlile kuya engalweni (mm) | 175 | 175 |
| I-spindle taper | ISO40, MT4, ISO30 | I-ISO40, |
| Ukuhamba kwe-Spindle (mm) | 120 | 120 |
| Ibanga lesivinini se-spindle (r.min) | 115-1750(V),40-1310(H) | 60~1500/8(V), 40~1300/12(H) |
| U-T wethebula (CHA./UBUDALA/IBANGA)(mm) | 3/14/70 | 3/14/70 |
| Isiphakeli semikhono (mm/min) | 0.08/0.15/0.25 | |
| Isivinini sokukhuphuka/sokwehla kwetafula | 560 | 560 |
| Isivinini samaphampu okupholisa | 12 | 12 |
| Injini yepompo yokupholisa (w) | 40 | 40 |
| Injini ye-headstock ephezulu/ephansi (w) | 750 | 750 |
| Injini eyinhloko(kw) | 0.85/1.5(V) 2.2(H) | 2.2(V) 2.2(H) |
| Ubukhulu obuphelele (L×W×H)(mm) | 1655×1450×2150 | 1700×1480×2150 |
| I-NW/GW(kg) | 1400/1550 | 1300/1450 |
